Service Manual

ENGINE

5-4 Floating Deck Mid-Size Service Manual

18. Raise the machine so that the underside of the

chassis can be accessed.

19. Remove the trailing shield from the chassis by ﬁ rst

removing the left end of the shield rod (bent at a 45º

angle) from the hole in the chassis and then remove

the right side of the shield rod (bent at a 90º angle)

from the right side of the chassis (Fig. 0801).

Fig 0801 PICT-0273

16. Remove the carrier frame cover (Fig. 0799).

Fig 0799 PICT-0280

17. Roll the PTO drive belt off the center mower deck

pulley (Fig. 0800).

15. Push the grommet and clutch plug through the

chassis frame to the underside of the machine (Fig.

0798).

Fig 0800 PICT-0283

Fig 0798 PICT-0277