Service Manual

4-18

WPM Drive Systems Manual

SINGLESPEEDBEVELGEARTRANSMISSION

6. Coat the axle, key, and spring with #2 molybendum

disulde grease or anti-seize compound before

installing the pinion (Fig. 087).

Fig087 MVC-472

7. The wheel pinion is marked with an R and L for right

and left. Identify right and left from the operator’s

position (Fig. 088). On the right side, the R should

face outward. The letter L should face outward on

the left side. If the wheel pinions are reversed, the

wheels will not drive.

Fig088 MVC-474

Note: SeeChapter5formoreinformationonWheel

Clutches.