Installation Instructions

2
InstallingtheBlockHeaterKit
Partsneededforthisprocedure:
1Blockheater
2
Flanged-headbolts(8x16mm)
1Heater-electricalcord
1
Cabletie
Procedure
1.LubricatetheO-ringontheblockheaterwith15W-40
engineoil.
2.Inserttheblockheaterintotheholeintheengineblock
withtheelementoftheheaterpointingdown(Figure
6).
Figure6
1.Flanged-headbolts(8x
16mm)
3.Blockheater
2.Heaterelement
4.Hole(engineblock)
3.Aligntheholeintheblockheaterwiththeholeinthe
engineblock(Figure6).
4.Securetheblockheatertotheblock(Figure6)withthe
2anged-headbolts(8x16mm).
5.Torquetheboltsto24N-m(212in-lb).
6.Connecttheconnectoroftheheater-electricalcordto
theconnectoroftheblockheater(Figure7).
Figure7
1.Connector(electricalcord)2.Connector(blockheater)
7.Routethecordoverthetopoftheright-framechannel
ofthemachine(Figure8).
Figure8
1.Cabletie3.Chargecable(alternator)
2.Plug(electricalcordforthe
blockheater)
4.Right-framechannel
8.Securetheelectricalcordoftheblockheatertothe
chargecableofthealternatorwithacabletie(
Figure8)
3