Installation Instructions

Figure6
1.Hydraulic-returntting
(labeledTonthe
rear-attachmenthydraulic
valve)
4.Hydraulic-pressureline
2.Hydraulicload-sense
tting(labeledLSonthe
rear-attachmenthydraulic
valve)
5.Hydraulicload-senseline
3.Hydraulic-pressure
tting(labeledPonthe
rear-attachmenthydraulic
valve)
6.Hydraulic-returnline
4.Connectthehydraulicload-senselinetothehydraulic
load-sensetting(labeledLSontherear-attachment
hydraulicvalve)asshowninFigure6.
5.Connectthehydraulic-returnlinetothehydraulic-return
tting(labeledTontherear-attachmenthydraulic
valve)asshowninFigure6.
6.Installthevalve-mountplate;refertoInstallingthe
Valve-mountPlate.
3
InstallingtheValve-mount
Plate
Partsneededforthisprocedure:
1Valve-mountplate
2
Hex-headscrew(12x30mm)
Procedure
1.Alignthe2holesintheframe-mountplatewiththe2
holesinthevalve-mountplate(Figure7).
2.Installthe2newhex-headscrews(12x30mm)and
the2locknuts(12mm)removedinstep
3ofRemoving
theRear-coverPlateandtheCoverPlateasshownin
Figure7.
Figure7
1.Valve-mountplate3.Frame-mountplate
2.Hex-headscrews(12x30
mm)
4