Operator's Manual

Figure9
1.Locknut(1inch)
4.Washer
2.Upper-nutretainer
(machineswithatrack
drive)
5.Bolt(1x5-1/2inch)
3.Lower-nutretainer
(machineswithwheels)
4.Slipawasherontoabolt(1x5-1/2inch)andpartially
threadtheboltintothenutthatyouinstalledinstep
3;refertoFigure9.
5.Slipawasherontoeachoftheremainingbolts(1
x5-1/2inch),andinsertthemfromoutsideofthe
trencher(Figure10)throughtheremainingholeinrow
1(machineswithatrackdrive)orrow2(machines
withwheels).
Figure10
1.Locknut(1inch)4.Hole(row2formachines
withwheels)
2.Washer5.Washer
3.Hole(row1formachines
withatrackdrive)
6.Bolt(1x5-1/2inch)
6.Slipawasherandpartiallythreadalocknutontothe
endofeachofthebolts.
7.Insert2locknutsintothe2nutretainerslocatedatthe
forwardsideoftherear-attachmentmountingplateof
themachine(Figure11).
Figure11
1.Mountingplate
3.Locknut(1inch)
2.Nutretainer
8.Positionthetrenchersothatitisattherearofthe
tractionunit.
9.Aligntherowofboltsonthetrenchersothattheyare
abovetheupperslotsinthemountingplateonthe
tractionunit(Figure12).
9