Operator's Manual
Table Of Contents
- NO TITLE
- .
- 1 Preparing to Install the Attachment onto the Machine
- 2 Installing the Backhoe Frame and Swing Tower onto the Machine
- 3 Installing the Backhoe Wiring Harness
- 4 Installing the Walkway to the Machine
- 5 Connecting the Controls to the Wiring Harness
- 6 Installing the Controls Cover and the Panels
- 7 Installing the Stabilizers
- 8 Installing the Stabilizer Hydraulic Cylinders
- 9 Installing the Boom
- 10 Installing the Boom Hydraulic Cylinder
- 11 Connecting the Hydraulic Pressure and Return Hoses
- 12 Bleeding the Stabilizer Cylinders
- 13 Connecting the Hydraulic Hoses to the Boom Hydraulic Cylinder
- 14 Bleeding the Boom Elevation Cylinder
- 15 Installing the Dipper
- 16 Installing the Dipper Hydraulic Cylinder
- 17 Installing the Bucket
- 18 Connecting the Hydraulic Hoses to the Dipper and Bucket Hydraulic Cylinders
- 19 Bleeding the Hydraulic System
- 20 Testing the Operator-presence Switch and the E-stop Switch
- 21 Lubricating the Stabilizers
- NO TITLE
- NO TITLE
- NO TITLE
- NO TITLE
![](/manual/toro/25452/1-operator-s-manual-english/images/img-13.png)
Figure17
Bottomview
1.TerminalscrewA
3.Saddlewashers
2.E-stopswitch4.TerminalscrewB
6
InstallingtheControlsCover
andthePanels
NoPartsRequired
Procedure
1.InstalltheE-stopswitchassemblyontothecontrols
coverasfollows:
A.Locatethealignmenttangonthebodyofthe
switch(Figure18).
Figure18
1.Switch6.C-clip
2.Alignmenttang
7.Groove
3.Notchinthehole8.Button
4.Jamnut
9.Screw
5.Squaretting
10.Buttoncover
B.Aligntheswitchfromtheinsideofthecontrol
coverandthroughtheholeintheupperright
corner(Figure18).
Note:Ensurethatthealignmenttangonthe
switchalignswiththenotchintheholeforthe
switch.
C.Securetheswitchtothepanelwiththejamnut
(Figure18)thatyouremovedinstepCof5
ConnectingtheControlstotheWiringHarness
(page11).
D.InstalltheC-clip(Figure18)thatyouremoved
instepCof5ConnectingtheControlstothe
WiringHarness(page11)intothegrooveinthe
bodyoftheswitch.
E.Alignthesquarerecessinthebackofthebutton
tothesquarettingoftheE-stopswitch.
F.Securethebuttontotheswitchwiththescrew
(Figure18)thatyouremovedinstepBof5
ConnectingtheControlstotheWiringHarness
(page11).
13