Installation Instructions

7.Torquethevalvenutto142to162N-m(105to120
ft-lb).
8.Applythread-lockingadhesivetothe2bolts(5/16
inch)andlooselysecurethedirectionalvalveassembly
tothecoverusingthe2bolts,and2washersasshown
inFigure6.
Note:Makesurethatport2isshowingontopofthe
valve.
Figure6
1.Bolts(5/16inch)3.Valvettingcover
2.Washers
9.Removethevalvettingcovercurrentlyinstalledon
thebulkheadasshowninFigure6.
InstallingtheHydraulicHoses
andtheDecal
1.Installthelonghydraulictubefromtheteettingto
thefurthest90degreettingonthebulkheadassembly
asshowninFigure7.
Figure7
1.Longhydraulictube
3.Shorthydraulictube
2.90-degreetting(5/8inch
male,3/4inchfemale)
2.Installtheshorthydraulictubefromthe90-degree
ttingontopofthedirectionalvalveassemblytothe
closest90-degreettingonthebulkheadassemblyas
showninFigure7.
3.Connectthe30-inchhose,previouslyinstalledonthe
bottomofthedirectionalvalveassembly,totheoutside
90-degreettingontheauxiliaryvalveasshownin
Figure8.
Figure8
1.Hydraulichose(30inches)3.Hydraulichose(24inches)
2.90-degreetting(5/8male,
female)
4.Installthe24-inchhosefromtheinnermost90-degree
ttingtothe90-degreettingontheteevalve
connectedtothedirectionalvalveassemblyasshown
inFigure8.
5.Securethehosestogetherwiththe2cableties.
6.Tightentheboltssecuringthedirectionalvalve
assemblytothecover(Figure6).
7.InstallthedecalasshowninFigure9.
1
g027031
Figure9
1.Decal
4