Installation Instructions

InstallingtheAuxiliaryValve
1.Applythread-lockingadhesivetothe3bolts(M8)and
securetheauxiliaryvalvetothebracketasshownin
Figure2.
Figure2
1.90-degreettings3.Bolts(M8)
2.Bracket
2.Installthe2ttings(90degree,1/2-inchmale,5/8-inch
male)ontothevalveasshowninFigure2.
Note:Ensurethatthettingontherightsideis
turned25degrees.
3.Removethebolts,washers,andnutssecuringthelower
rightsidepaneltotheROPS(Figure3).
Figure3
4.SecuretheauxiliaryvalveassemblytotheROPSusing
thebolts,washers,andnutsremovedintheprevious
stepasshowninFigure3.
InstallingtheDirectionalValve
CoverandAssembly
1.Installthe3clipnutsontothenewcoverassemblyas
showninFigure4.
Figure4
1.Bolts(M6)3.Cover
2.Clipnuts
2.Applythread-lockingadhesivetothe3bolts(M6)and
securethecovertothebulkheadmountasshownin
Figure4.
3.Installbothofthe90-degreettings(5/8-inchmale,
male),theTeetting,andthe90-degreetting
(5/8-inchmale,5/8-inchfemale)ontothedirectional
valveasshowninFigure5.
Figure5
1.90-degreetting(5/8-inch
male,5/8-inchmale)
4.Valvenut
2.90-degreetting(5/8-inch
male,5/8-inchfemale)
5.Coil
3.Teetting6.90-degreetting(5/8-inch
male,male)
4.Torquethettingsto142to162N-m(105to120ft-lb).
5.Installthe30-inchhoseontothelower90-degree
tting(5/8-inchmale,male)(Figure5).
6.Loosenthevalvenutandrotatethecoilonthe
directionalvalve180degrees(Figure5).
3