Operator's Manual

3.Applygreasetothegreasetting.
Note:Usealithium-basegrease.
Note:Cleanupanyexcessgreaseonthewalkway
pivotwitharag.
4.Rotatethewalkwayclockwiseuntiltheholeinthe
forward,horizontalangeofthewalkwayisaligned
withtheholeinthehorizontalangeofthewalkway
supportbracket(Figure16).
Note:Raiseorlowerthepivotbracketasneededto
alignthewalkwaywiththewalkwaysupportbracket.
5.Tightentheboltsandnutsthatsecurethepivotsupport
brackettothefuel-tankange(Figure16).
6.Securethewalkwaytothewalkwaysupportbracket
withthelockingpin(Figure16).
6
InstallingtheHandRailand
theSeat
Partsneededforthisprocedure:
1Handrail
1
Seat
2
Flangebolts(8x25mm)
2
Flangenuts(8mm)
4
Bolts(5/16x7/8inch)
4
Lockwasher(5/16inch)
Procedure
1.Aligntheholesinthebracketforthehandrailwiththe
holesintheseatpost(Figure17).
Figure17
1.Seatpost5.Bolt—5/16x7/8inch(4)
2.Flangenut(8mm)6.Lockwasher(5/16inch)
3.Handrail
7.Seatsupport
4.Flangebolt(8x25mm)8.Seat
2.Securethehandrailtothebracketoftheseatpostwith
2angebolts(8x25mm)and2angenuts(Figure17).
3.Aligntheholesofthebottomoftheseatwiththeholes
inthebracketontheseatarm(Figure17).
4.Applymedium-grade(serviceremovable)
thread-lockingcompoundtothe4bolts(5/16x7/8
inch)fromlooseparts.
5.Securetheseattothesupportoftheseatpostwith4
bolts(5/16x7/8inch)and4lockwashers;referto
Figure17.
15