Installation Instructions

4
MountingtheHorn(RT1200
UnitsOnly)
Partsneededforthisprocedure:
1Horn
1Mountingbracket
1Threadlocker
Procedure
1.Removethemountingstrapandnutfromthehorn.
Discardthemountingstrap.
2.Applythethreadlockertothehornstud.
3.Installthehornontothemountingbracketandtorque
to7.73to12.8N-m(5.7to9.5ft-lb)(Figure8).
Note:Orientthehornopeningdownward.
Figure8
1.Horn3.Nut
2.Mountingbracket
4.Removetheforwardboltfromtheexistingbracket,
anduseittoinstallthemountingbracket(Figure9).
Figure9
1.Bolt3.Existingbracket
2.Mountingbracket
5.Connectthewiringharnesstothehornposts(Figure
10).
Figure10
Mountingbracketnotshown
1.Hornpost
5