Operator's Manual

2.Ifeitherendofthebladerotatesdownward,le
thatend(notthecuttingedgeortheendnear
thecuttingedge)untilneitherendoftheblade
drops.
InstallingtheBlade
1.Installasharp,balancedT oroblade,the
accelerator,andthebladenuts.Thesailofthe
blademustpointtowardthetopofthemower
housingforproperinstallation.
Note:Torquethebladenutsto20to37N∙m
(15to27ft-lb).
WARNING
Operatingthemachinewithoutthe
acceleratorinplacecancausethe
bladetoex,bend,orbreak,resulting
inseriousinjuryordeathtoyouorto
bystanders.
Donotoperatethemachinewithoutthe
acceleratorinplace.
2.Returnthemachinetotheoperatingposition.
AdjustingtheBlade-Brake
Cable
Theblade-brakecableisadjustedatthefactory;you
donotneedtoadjustitunlessyouarereplacingthe
cableortheblade-brakebelt.Ifyouneedtoreplace
thecable,replaceboththecableandthebeltat
thesametime.
1.Shutofftheengineandwaitforallmovingparts
tostop.
2.Disconnectthewirefromthesparkplug.
3.Installanewblade-brakebeltandassemblethe
machineexceptforthe2beltcoversonthetop
ofthemowerhousing.
4.Installthenewblade-brakecable,butdonot
tightenthecableclamponthetopofthemower
housing(Figure33).
g024466
Figure33
1.Spring2.Cableclampandscrew
5.Loosenthecable-clampscrew(Figure33).
6.Pullthecablejackettoremoveslack(Figure34).
Note:Donotputtensiononthespring.
g239131
Figure34
7.Markthebrakecable(Figure35),thenadjust
thejacketuntilthereisapproximately8mm
(5/16inch)ofslack(Figure35).
g239133
Figure35
1.Markthecablehere
27