Addendum

G008823
12345
Figure2
1.Mowerhousing4.Washer
2.Spacer5.Self-tappinghexhead
screw
3.Handle
3.Movethehandletotheoperatingposition.
4.Attachthehandlebracestothelowerhandlesides
with2oval-headboltsandsecurethemngertight
using2locknuts(Figure1).
Important:Ensurethattheboltheadsareto
the
inside ofthehandle.
5.Aligntheovalboltheadswiththehandleasshown
inFigure1;thensecurethehandleasfollows:
•Iftheholesinthehandleareround,alignthe
ovalboltheadswiththehandleasshownin
Figure1;then,holdingtheheadsinthatposition,
tighteneachnutwithawrenchtopullthesquare
shankintothehandleuntiltheboltheadsare
tightagainstthehandle.
Note:Thesquareshankoftheboltswillnot
readilytintotheroundholes.
•Iftheholesinthehandlearesquare,alignthe
ovalheadboltheadswiththehandleasshownin
Figure1,insertthesquareshankintothehandle
sothattheboltheadsaretightagainstthehandle,
andthentightenthelocknuts(Figure1).
6.Tightentherestofthefastenersonthehandleand
handlebraces.
7.Usethecabletieprovidedtosecurethecontrol
cable(s)tothehandle.
Note:Attachthecabletieaslowaspossibleonthe
handletopreventthecable(s)fromhookingonto
theendcaponthereardoorrodandinterferingwith
theself-propelsystem(Figure1).
2