Operator's Manual

(5/16x1-1/4inches),washers,andthinlocknuts
(5/16inch)(Figure3).
Figure3
1.Bagsupportrod8.Thinnyloninsertlocknut
(2)
2.Carriagebolt
9.Bottomholeinhousing
3.Bagaligningplate
10.Washer(4)
4.Caplocknuts(3)11.Locknut(2)
5.Handle
12.Bolt,(5/16x1-1/4inches)
(2)
6.Bolt,(5/16x1-1/2inches)
(2)
13.Cabletie(3)
7.Handlelatch(2)
2.Securethehandlelatchestothehandlewith2bolts
(5/16x1-1/2inches),washers,andlocknuts(5/16
inch)(Figure3).
Note:Installthewasherswiththecupsidefacing
thehandle.
Note:Youcanadjustthehandleheightfor
comfortableoperation.Standbehindthehandleto
determinetheheight.Toadjustthehandleheight,
positiontheboltsandthelocknutsthatsecurethe
handlelatchestothehandleintotheothermounting
holesinthelatches.
3.Insertthecarriageboltthroughthebagaligning
plateandthesecondholefromthetopontheleft
sideofthehandle,andsecureitwithacaplocknut
(
Figure3).
4.Slidethebagsupportrodthroughthethirdfromthe
topmountingholesinthehandle,andsecureeach
endwithacaplocknut(Figure3).
5.Usecabletiestosecurethecontrolcablestothe
handle(Figure3).
2
InstallingtheStarterRope
NoPartsRequired
Procedure
Pullthestarterropethroughtheropeguideonthe
handle(Figure4).
Figure4
1.Starterrope
2.Ropeguide
Note:Tomaketheropeeasiertoinstall,squeezethe
controlbaronthehandle.
3
InstallingtheDischargeTunnel
Plug
Partsneededforthisprocedure:
1Dischargetunnelplug
Procedure
1.Openthedischargedoorbypullingforwardonthe
handleandmovingitrearward(Figure5).Holdthe
dischargedoorhandletopreventthespring-loaded
doorfromclosingwhileyouinserttheplug.
8