Service Manual

FUEL SYSTEM 3-17
Intake Manifold
Intake Manifold Removal
•
Unscrew the intake manifold mounting bolts [A].
•
Remove the breather pipe [B] from the intake manifold.
Intake Manifold Installation
•
Replace the O-ring [A] with a new one.
•
Clean the mating surface of the carburetor and intake
manifold.
•
Clean the mating surface of the carburetor and intake
manifold and install the new gasket [A] and intake mani-
fold.
•
Install the spacers [A] and tighten the intake manifold
mounting bolts [B].
•
Do not clearance between intake manifold and fuel tank.
Intake Manifold Inspection
•
Inspect the intake manifold for cracks.
•
Cracks not visible to the eye may be detected by usi ng a
metal crack detection system (Visual color check: com-
monly found at automotive parts store.).
If a crack is present in the i ntake manifold, replace it.
•
Inspect the gasket surfaces for burrs and nicks.