Service Manual
19
19
CARBURETOR
N
0
T
E
:
Before removing float chamber, rotate float cham-
ber clockwise and counterclockwise for
1/6
turns
2
or
3
times, pushing float chamber to carb. body to release stick-
ing
of
float chamber and rubber gasket.
C
A
UT
I
0
N
:
Remove main jet before removing main nozzle.
Main iet will interfere with main nozzle
C
A
UT
I
0
N
:
Do not clean jet orif ices and float valve
seat with hard object.
W
A
R
N
I
N
G
:
Follow instructions prepared by clean-
er manufacturer when using cleaner.
1.
Dip
carb. components except non-metaric parts such as
gasket into carb. cleaner until dirt
is
removed and
rinse them with solvent.
NOT
E
:
Rinse carb. aluminum components
in
hot water to
neutralize corrosive action of cleaner, if
so
instructed by
the manufacturer.
2.
Dry components with compressed air.
Make sure all orifices and passages are free from dirt
or foreign object.
E24FCIOWI
C
A
U
T I
0
N
:
Do
not use rags or paper to dry components
to avoid plugging orif ices by lint.
E24FCI
1W3