Service Manual

15
15
CONTROL SYSTEM
1. Turn carb. pilot screw (B) in until it just seats and
2. Start and warm up engine without load.
3. Move throttle lever on dash to "SLOW" position.
4. Adjust slow idle speed to specified rpm (see GENERAL
SPECIFICATIONS) by moving throttle stop screw (A).
5. Adjust pilot screw (B) until engine idles at maximum
speed and then turn pilot screw out additional
1/4 turn.
6. Re-adjust slow idle speed to specified rpm.
then back out
1 turn.
E I6FC I OW2