Operator's Manual

AdjustingtheCuttingHeight
WARNING
Adjustingthecuttingheightmaybringyouinto
contactwiththemovingblade,causingserious
injury.
•Stoptheengineandwaitforallmovingparts
tostop.
•Donotputyourngersunderthehousingwhen
adjustingthecuttingheight.
CAUTION
Iftheenginehasbeenrunning,themuferwillbe
hotandcanseverelyburnyou.Keepawayfromthe
hotmufer.
Adjustthecuttingheightasdesired.Setallfourwheels
tothesameheight.
Note:Toraisethemower,moveall4cuttingheight
leversforward;tolowerthemower,movethemall
rearward(
Figure14).
Figure14
Note:Thecuttingheightsettingsare1inch(25mm);
1-1/2inches(38mm);2inches(51mm);2-1/2inches
(64mm);3inches(76mm);3-1/2inches(89mm);4
inches(102mm);and4-1/2inches(114mm).
StartingtheEngine
Important:Themowerhasasafetyswitchthat
preventsyoufromstartingthemowerunlessyou
rstinstallthemulchplugorthegrassbagsecurely
onthemower.
1.Installthemulchplug(Figure15)orthegrassbag
(
Figure16)onthemower.
Figure15
Figure16
2.Iftheignitionswitchonyourmower(Figure10)
isatoggleswitch(withbothan“I”anda“Stop”),
pushtheswitchtothe(“I”)position.Otherwise,go
tostep
3.
3.Pulltherecoilstarteruntilyoufeelresistance,then
pullitsharply(
Figure17).
Figure17
1.Bladecontrolbar
9