Operator's Manual
Table Of Contents
- General Lawn Mower Safety
- Sound Pressure
- Sound Power
- Hand/Arm Vibration
- 1 Assembling the Handle
- 2 Installing the Blade-control Bar
- 3 Filling the Engine with Oil
- 4 Charging the Battery
- Filling the Fuel Tank
- Checking the Engine Oil Level
- Adjusting the Cutting Height
- Adjusting the Handle Height
- Starting the Engine
- Using the Self-propel Drive
- Stopping the Engine
- Engaging the Blade
- Disengaging the Blade
- Checking the Blade-stop System Operation
- Recycling the Clippings
- Bagging the Clippings
- Side-discharging the Clippings
- Preparing for Maintenance
- Servicing the Air Filter
- Changing the Engine Oil
- Charging the Battery
- Replacing the Fuse
- Replacing the Battery
- Adjusting the Self-propel Drive Cable
- Servicing the Blade-drive System
- Servicing the Cutting Blades
- Washing Underneath the Machine
- General Information
- Preparing the Fuel System
- Preparing the Engine
- Removing the Machine from Storage
1
2
3
4
5
6
7
G017634
Figure14
Frontcutting-heightlever
1.A=10.8cm(4-1/4inches)5.E=5.7cm(2-1/4inches)
2.B=9.5cm(3-3/4inches)6.F=4.4cm(1-3/4inches)
3.C=8.3cm(3-1/4inches)7.G=3.2cm(1-1/4inch)
4.D=7.0cm(2-3/4inches)
1
2
3
4
5
6
7
G017635
Figure15
Rearcutting-heightlever
1.A=10.8cm(4-1/4inches)5.E=5.7cm(2-1/4inches)
2.B=9.5cm(3-3/4inches)6.F=4.4cm(1-3/4inches)
3.C=8.3cm(3-1/4inches)7.G=3.2cm(1-1/4inch)
4.D=7.0cm(2-3/4inches)
AdjustingtheHandleHeight
Youcanraiseorlowerthehandletoapositionmore
comfortableforyou.
1.Pullthehandle-lockleverrearwardtodisengagethe
handle-lockpins(Figure16).
2
G016488
3
1
Figure16
1.Handle-locklever3.Notches
2.Handle-lockpin(2)
2.Rotatethehandleandalignthedesirednotchinthe
handlebrackettothehandle-lockpins;refertoFigure
16.
3.Releasethehandle-locklevertosecurethehandlein
place.
StartingtheEngine
StandardModel
Pulltherecoilhandleslowlyuntilyoufeelresistance,thenpull
itsharply.Allowtheropetoreturntotheengineslowly.
Note:Ifthemachinedoesnotstartafterseveralattempts,
contactanAuthorizedServiceDealer.
Electric-startModel
Youcanstarttheengineonanelectric-startmodelbyusing
eithertheignitionkeyortherecoil-starthandle.
•IgnitionKey:TurnandholdtheignitionkeytotheStart
position(Figure17);whentheenginestarts,releasethe
key.
Important:Donotattempttostarttheenginewith
theblade-controlbarengaged;otherwise,youmay
blowthefuse.
Note:DonotholdtheignitionkeyintheStartposition
forlongerthan5secondstopreventburningoutthe
startermotor.
10