Service Manual
9-8
WPM Drive Systems Manual
HANDLES&CONTROLCABLES
Lawn-Boy2BailHandle
The 2 bail style is shown here (Fig. 277). The top bail is
the engine stop. Release it and the ignition is grounded
and a brake comes on to help stop the ywheel. The
lower bail is the self-propel bail. Squeeze it to tension
the belt and drive the transmission.
The engine stop cable is not adjustable. If it does not
function, it must be replaced.
The self-propel cable is adjustable through a clamp. It
should be adjusted so that lowering the bail about 1”
(25mm) disengages the self-propel. This is a gap that is
comfortable for most operators.
AdjustingthePersonalPace/EasyStride
Cable
Ensure the transmission belt is disengaged, transmission
tilted forward. Loosen the cable clamp on the handle.
When you pull the cable down the Personal Pace/Easy
Stride handle should raise to the stop. Hold the cable
and secure the clamp (Fig. 276).
Fig276 DSC-4829a
Fig277 3428-0049