Service Manual

ChargingSystemInstallation
1.Installthechargecoiltothecrankcase.
2.Installthe2(10mm)mountingboltssecuringthechargecoiltothe
crankcase.Torqueboltsto90in-lbs.(10Nm).Setairgapto:
AirGap:0.0157±3.007in.(0.4–0.2mm)
Figure288
3.Installthefueltanktotheengine.
4.Installthe10mmnutandwashertothefueltankmountingstud.Torquenut
andwasherto90in-lbs.(10Nm).
Figure289
5.Installthe2shroudmountingstudssecuringthefueltanktothecrankcase.
Torquestudsto70–105in-lbs.(8–12Nm).
1P65F-2ServiceManual
Page8–19
ElectricalSystem:ServiceandRepairs
3429-270RevA