Service Manual

60
GTS 200
Muffler
Install Muffler
1. Coat muf fler mounting screws with V alve Guide
Lubricant, Briggs & Stratton Part #93963.
2. Place new exhaust gasket on cylinder head and place
muf fler flange on gasket.
3. Install two screws in muf fler flange and torque to
85 in. lbs. (10.0Nm), Fig. 151.
1
1
1
Fig. 151 – Installing Muffler
1. Screw: torque to 85 in. lbs (10.0Nm)
4. Install screw in muf fler bracket to cylinder head and
torque to 85 in. lbs. (10.0Nm), Fig. 151.
5. Install screw in muf fler to cylinder bracket and torque to
85 in. lbs. (10.0Nm).
Install Muffler Guard
1. Lightly coat muf fler guard mounting screws with V alve
Guide Lubricant, Briggs & Stratton Part #93963.
2. Place muf fler guard over muf fler and torque muf fler guard
to bracket screw to 85 in. lbs. (10.0Nm), Fig. 148.
3. T orque muf fler guard to cylinder screw to 50 in. lbs.
(6.0Nm).
4. T
orque muf fler guard to blower housing screw to
15 – 20 in. lbs. (2Nm).
5. Install blower housing as described in Rewind Starter ,
Page 37.
6. Install dipstick tube and dipstick.
7. Install fuel tank and static guard.