Operator's Manual

3353-459 Rev A

• Keep all nuts and bolts, especially blade

attachment bolts, tight and keep equipment in

good condition.

• Never tamper with safety devices. Check their

proper operation regularly.

• Keep mower free of grass, leaves, or other debris

build-up. Clean up oil or fuel spillage. Allow

mower to cool before storing.

• Stop and inspect the equipment if you strike an

object. Repair, if necessary, before restarting.

• Never attempt to make wheel height adjustments

while the engine is running.

• Grass catcher components are subject to wear,

damage, and deterioration, which could expose

moving parts or allow objects to be thrown.

Frequently check components and replace with

genuine Toro parts, when necessary.

• Mower blades are sharp and can cut. Wrap the

blade or wear gloves, and use extra caution when

servicing them.

• Replace a faulty muffler.

• Do not change the engine governor setting or

overspeed the engine.

Sound Pressure

This unit has a maximum sound pressure level at the

operator’s ear of 89 dBA, based on measurements of

identical machines per EN 11094 and EN 836.

Sound Power

This unit has a guaranteed sound power level of

100 dBA, based on measurements of identical

machines per EN 11094.

Vibration

This unit does not exceed a hand/arm vibration level

of 7.0 m/s

, based on measurements of identical

machines per EN 1033.

Safety/Instruction Decals

Important: Safety and instruction decals are located near areas of potential danger. Replace damaged decals.

Manufacturer’s Mark

1. Indicates the blade is identified as a part from the original

machine manufacturer.

94-8072

104-7908

1. Warning—do not operate the mower without the rear discharge

plug or bag in place; do not operate the mower without the side

discharge cover or deflector in place.