Service Manual

9-13

WPM Drive Systems Manual

HANDLES&CONTROLCABLES

3SpeedTransmissionModels

Handles on 3 speed models are basic and easily

disassembled.

3SpeedControlCables

The shift cables are not adjustable. To install the shift

cable, insert the end of the cable in the shift arm and slip

the end of the cable jacket into the bracket (Fig. 290).

The adjustment point for this cable is a knob, jam nuts,

or a clamp to the handle (Fig. 292 and Fig. 293).

Fig290 3428-0196

The traction control cable tilts the transmission backward

to tighten the belt and engage the transmission (Fig.

291). It must tighten sufciently to fully drive the

transmission, yet allow the transmission to rock forward

and loosen the belt to disengage.

Fig291 3428-0195

Fig292 3428-0043-2

A. Clamp

A. Blade brake cable B. Jam nuts

Fig293 g 69