Service Manual

FLYWHEEL (cont'd)
Removal (cont'd)
5. Remove the key and check its condition.
6. Replace the crankshaft and/or flywheel if
the keyway is distorted or cracked.
Replace the key if damaged.
magnets for strength.
Check the magnets by holding the flywheel
up against a metal object. The magnets
shouldhave a strong pulling force.
7. Check the flywheel for wear and flywheel
Installation
Tools Required:
1/2" Socket
absolutely clean.
the centerline of the crankshaft.
1. Make sure the flywheel keyway is
2. Make sure the key is installed parallel with
3.
4.
Locate the keyway cutout in the flywheel
over the key and shaft.
Torque the flywheel nut to
375-425 in. Ibs
(43-47 Nm).
7-8
Service Section