Operator's Manual
Table Of Contents
- General Operation
- Slope Operation
- Children
- Service
- 1 Installing the Blade-control Bar
- 2 Assembling and Unfolding the Handle
- 3 Installing the Recoil-starter Rope in the Rope Guide
- 4 Filling the Engine with Oil
- Filling the Fuel Tank
- Checking the Engine Oil Level
- Adjusting the Cutting Height
- Adjusting the Handle Height
- Starting the Engine
- Using the Self-propel Drive
- Stopping the Engine
- Engaging the Blade
- Disengaging the Blade
- Checking the Blade-brake Clutch Operation
- Recycling the Clippings
- Bagging the Clippings
- Side-discharging the Clippings
- Preparing for Maintenance
- Replacing the Air Cleaner
- Changing the Engine Oil
- Lubricating the Wheel Gears
- Replacing the Blade
- Cleaning the Blade-brake-clutch Shield
- Cleaning under the Machine Housing
- Preparing the Machine for Storage
- Folding the Handle
- Removing the Machine from Storage
