Service Manual

8-22

WPM Drive Systems Manual

BBC/BOS/BCS

2. On the left side of the mower next to the rear wheel,

loosen the clamp that secures the BBC cable to the

mower housing. Near the left front wheel, unhook

the spring end of the cable from the bellcrank.

Remove the screw, bellcrank, sleeve, and unhook

the control link from the lever (Fig. 217).

IdlerArmSystemDisassembly(Recycler/

RearBagger)

1. Drain the fuel and oil. Remove the spark plug wire.

Disassembly for the idler arm begins on top of the

mower housing.

TORORECYCLER/REARBAGGER

BBC

Fig216 1350-001 a

Fig217 3428-0174

3. Take a loop of wire or rope and unhook the spring

under the lever (Fig. 218). With the tension removed

you can now remove the long screw through the

lever. We would suggest loosening this screw, but

leave it engaged at this time (Fig. 220).

Fig218 3428-0177-2

A. Spring C. Wire loop

B. Screwdriver