Service Manual

8-33

WPM Drive Systems Manual

BBC/BOS/BCS

15. The anchor plate contains a pivot screw with a

bushing. Remove the locknut (Fig. 251).

BrakeArmAssembly

1. Place the spacer with the large diameter down on

the brake arm (Fig. 253).

Fig251 MVC-224Xa

Fig253 MVC-211Xa

2. Place the bearing with the ange side down on the

spacer and place the washer on top of the bearing

(Fig. 254).

Fig254 MVC-213Xa

16. The bushing has a notch removed from the ange

end. Align that notch in the bushing with the tab in

the anchor plate (Fig. 252).

A. Tab B. Notch

Fig252 MVC-257X