Operator's Manual

3352-860

Folding the Handle

1. Remove the

lower handle knobs

and detach the

lower handle

brackets (A) from

the lower end of

both handle sides.

m-8097

Note: Attach the lower handle knobs onto the

bolts in the handle to prevent losing them.

2. Rotate the handle forward.

m-8151

m-8150

3. To unfold the handle, refer to Unfolding the

Handle on page 4.

Removing the Mower from

Storage

1. Remove the spark plug and pull the recoil start

handle a few times to blow the excess oil from the

cylinder.

2. Install the spark plug and tighten it with a torque

wrench to 15 ft-lb (20 Nm).

3. Connect the wire to the spark plug.