Operator's Manual

24
Problem Corrective ActionPossible Causes
Uneven cutting pattern 1. All 4 wheels are not at the
same height.
2. The blade is dull.
3. You are mowing in the same
pattern repeatedly.
4. The underside of the housing
contains clippings and debris.
1. Place all 4 wheels at the same
height.
2. Sharpen and balance the
blade.
3. Change the mowing pattern.
4. Clean under the housing.
Discharge chute plugs 1. The cutting height is too low.
2. You are mowing too fast.
3. The grass is wet.
4. The underside of the housing
contains clippings and debris.
1. Raise the cutting height.
2. Slow down.
3. Allow the grass to dry before
mowing.
4. Clean under the housing.
Lawn mower does not self-propel 1. The self-propel drive cable is
out of adjustment or is
damaged.
2. There is debris under the belt
cover.
1. Adjust the self-propel drive
cable. Replace the cable if
necessary.
2. Clean the debris from under the
belt cover.