Service Manual

4-13

WPM Drive Systems Manual

SINGLESPEEDBEVELGEARTRANSMISSION

14. Place the mower right side up and remove the three

hex head and one Allen head cap screws on each

side that hold the height of cut plates to the chassis

(Fig. 070). The transmission assembly will now drop

down.

16. The belt cover must be removed in order to remove

the belt (Fig. 072).

Fig070 MVC-848

15. There is a cross brace underneath the mower that is

held in place by two of the cap screws shown above

(Fig. 071).

Fig071 MVC-852

17. Remove 3 screws that secure the belt cover to the

housing (Fig. 073).

Fig073 MVC-744

Fig072 MVC-743

A. Belt cover