Installation Instructions

AssemblingtheRearPlatform
Cover
1.Assemble2ange-headcapscrews(3/8x1
inch)throughtheholesintotherearplatform
cover(Figure6)thatyouremovedinRemoving
theRearPlatformCover(page2).
g349595
Figure6
1.Retainingring(3/8inch)
3.Flange-headcapscrew
(3/8x1inch)
2.Rearplatformcover
2.Securethecapscrewstothecover(Figure6)
with2retainingring(3/8inch).
4
InstallingtheCEGuards
Partsneededforthisprocedure:
2
Full-threadedbolt(3/8x2inches)
2
Flangelocknut(3/8inch)
4
Clipnut(10mm)
2
Flange-headcapscrew(5/16x1inch)
2
Retainingring(5/16inch)
InstallingtheCE
Hydraulic-ComponentCovers
1.Partiallythreadthefull-threadedbolt(3/8x2
inches)throughthethreadedinsertintheguard
mountatthesideoftheframe(Figure7).
g349606
Figure7
1.Flangelocknut(3/8inch)3.Full-threadedbolt(3/8x2
inches)
2.Guardmount(sidesofthe
frame)
2.Assembleaangelocknut(3/8inch)ontothe
full-threadedbolt(Figure7).
Note:Ensurethatthe2or3threadsofthebolt
protrudebeyondtheendofthenut.
3.Repeatsteps1and2attheothersideofthe
machine.
4.Aligntheangelocknut(3/8inch)inthe
hydraulic-componentcovertothethreaded
insertinthetopguardmount(Figure8).
4