Installation Instructions

InstallingtheSprayerSupplyHose
1.Assemblethestraightbarbedttingofthesprayer
supplyhose—25x486mm(1x19-1/8inches)into
theinletportoftheeductorshutoffvalve(Figure71).
Figure71
1.T-tting(sprayerpump)5.90°tting
2.Inletport(eductorshutoff
valve)
6.Retainer(eductorshutoff
valve)
3.Straightbarbedtting7.Sprayersupplyhose—25
x486mm(1x19-1/8
inches)
4.Retainer
2.Securethestraightbarbedttingtotheeductorshutoff
valvewiththeretainerthatissuppliedwiththeshutoff
valve(Figure71).
3.Assemblethe90°ttingofthesprayersupplyhose
intotheopenportoftheT-ttingofthesprayerpump
(Figure71).
4.Securethe90°ttingtotheT-ttingwiththeretainer
(Figure71)thatyouremovedinstep5ofRemovingthe
AgitationBypassandSprayerSupplyHoses(page17).
InstallingtheEductorSupplyHose
1.Assemblethe90°ttingoftheeductorsupply
hose—2.5x156.5cm(1x61-5/8inches)totheleft
portoftheeductorshutoffvalve(Figure72).
Figure72
1.Flange(eductorinlet)
5.Flangeclamp
2.Straightbarbedtting6.90°tting
3.Eductorshutoffvalve7.Retainer(eductorshutoff
valve)
4.Gasket
8.Eductorsupplyhose—2.5
x156.5cm(1x61-5/8
inches)
2.Securethe90°ttingtotheeductorsupplyhosewith
theretainerthatissuppliedwiththeshutoffvalve
(Figure72).
3.Aligntheangeofthestraightbarbedttingforthe
eductorsupplyhoseandthegasketthatyouremovedin
RemovingtheEductorSupplyHosefromtheEductor
(page19)withtheangeoftheeductorinlet(Figure
72).
4.Securethestraightbarbedttingandgaskettothe
eductor(Figure72)withtheangeclampthatyou
retainedinRemovingtheEductorSupplyHosefrom
theEductor(page19).
34