Installation Instructions

3.T orquethenutsandboltsto1017to1243N·cm
(90to110in-lb).
InstallingthePivotingHoseReel
totheManifoldMount
Liftingequipmentcapacity:57kg(125lb)
1.Liftthepivotinghosereelwithliftingequipment
withthespeciedcapacity.
2.Aligntheholesinthesupportchannelforthe
pivoting-hosereelwiththeholesinthemanifold
mountforthesprayervalves(Figure182).
g031590
Figure182
1.Flangelocknuts(3/8inch)5.Lowertubeframe(pivoting
hosereel)
2.Manifoldmount(sprayer
valves)
6.Flange-headbolts(3/8x
2-1/4inches)
3.Supportchannel(pivoting
hosereel)
7.Mountingbracket(right
framechannelofthe
machine)
4.Flange-headbolts(3/8x
1inch)
3.Aligntheholesinthelowertubeframefor
thepivoting-hosereelwiththeholesinthe
mountingbracketattherightframechannelof
themachine(Figure182).
4.Assemblethesupportchanneltothemanifold
mount(Figure182)withthe4ange-headbolts
(3/8x1inch)andangelocknuts(3/8inch)
thatyouremovedinstep3ofRemovingthe
Pivoting-HoseReelfromtheManifoldMount
(page15).
5.Assemblethelowertubeframetothemounting
bracket(Figure182)withthe2ange-headbolts
(3/8x2-1/4inches)and2angelocknuts(3/8
inch)thatyouremovedinstep2ofRemoving
thePivoting-HoseReelfromtheManifoldMount
(page15).
6.T orquetheboltsandnutsto37to45N·m(27
to33ft-lb).
AssemblingtheHoseandFittings
1.Removethetubecouplerfromthecapatthe
angeattherightendofnozzlevalve10(Figure
183).
g031347
Figure183
1.Flange(nozzlevalve10)4.Cap
2.Gasket
5.Tubecoupler
3.Flangeclamp
2.Removetheangeclamp,gasket,andendcap
fromnozzlevalve10(Figure183).
Note:Retainthetubeconnector,angeclamp,
andgasketforinstallationlaterinthisprocedure.
Younolongerneedtheendcapthatyou
removedfromthemachine.
3.ApplyPTFEthread-sealingtapetothethreads
oftheT-tting(Figure184)thatyouremovedin
step3ofDisconnectingtheHosesandTubing
(page13).
83