Installation Instructions

Figure11
1.Carriagebolt(3/8x1inch)3.Centerbafe5.Rightbafe
2.Flangenut(3/8inch)4.Leftbafe
7
InstallingtheNewBlades
Partsneededforthisprocedure:
3Recyclerblades
Procedure
Important:Thesailpartoftheblade(i.e.,theturned-up
section)mustfacetheinsideofthemower(Figure12).
1.Toholdthespindleshaft,useanopen-endwrench
(1-1/2inches)onthespindle-shaftend(Figure12).
2.Installtheblade,curvedwasher,andbladebolt.
Note:Thespringdiskconemustbeinstalledtoward
thebolthead(Figure12).
3.Torquethebladeboltto115to150N∙m(85to110
ft-lb).
WARNING
Thebladesaresharp.Contactwithasharpblade
cancauseseriouspersonalinjury.
Wearglovesorwrapthesharpedgesoftheblade
witharag.
g037800
1
2
3
4
5
Figure12
1.Sailareaofblade
4.Bladebolt
2.Blade
5.Spindle-shaftend(hex
endshown)
3.Curvedwasher
10