Installation Instructions

3
InstallingtheKickerPlates
Partsneededforthisprocedure:
3Kickerplate
6
Phillipsheadscrew(#8x5/8inch)
Procedure
1.Alignthethreekickerplateswithholestowardthe
topofthedeck(Figure3).Thelongslopeofthe
kickersmustbefaceinward.
Figure3
1.Mowerdeck2.Kickerplate,installed
2.Iftherearerivetsblockingthemountingholesinthe
mower,drilloutthecenterofeachrivetwitha3/16
inch(5mm)drillbitanddiscardtherivet.
3.SecuretheplatestothedeckusingsixPhillipshead
screws(#8x5/8inch).Thescrewscomeupthrough
thetopofthemowerandintotheplate(Figure3).
4
InstallingtheDecal
Partsneededforthisprocedure:
1Recyclingdecal
Procedure
Installthedecalonleftsideofmower(Figure4).
Figure4
1.Recyclerdecal
2.Leftsideofmower
5
InstallingtheBladesand
Mower
Partsneededforthisprocedure:
3Recyclingmowerblade
Procedure
1.Installthenewrecyclingmowerbladesasdescribed
inyourOperator’sManual.
2.InstallthemowerasdescribedinyourOperator’s
Manual.
3