Installation Instructions

Figure1
1.Rollerbracket
5.Bolt(3/8x4-1/2inches)
2.Carriagebolt(3/8x3/4
inch)
6.Shortspacer
3.Flangenut(3/8inch)
7.Longspacer
4.Anti-scalproller
2
InstallingtheAnti-ScalpRoller
Partsneededforthisprocedure:
1Anti-scalproller
1
Bolt(3/8x4-1/2inches)
1Longspacer
1
Shortspacer
1
Flangenut(3/8inch)
Procedure
1.Slidethelongspacerintotheanti-scalproller
(Figure1).
2.Placetheshortspacerinsidetherollerhubonthe
sideoftherollerwiththeshorthub(Figure1).
3.Placetherollerintotherollerbracketandpushthe
bolt(3/8x4-1/2inches)throughthebracket,short
spacer,andthelongspacer/rollerassemblyatthe
desiredheight(Figure1).
Note:Inserttheboltsothatitsheadistowardthe
outsideofthemower.
4.Securetherollerwithaangenut(3/8inch)
(Figure1).
2