Service Manual

Fluid Recommendations
Fuel – Unleaded regular gasoline recommended to
minimize engine intake valve and combustion
chamber deposits.
Engine Oil – Service classification API SF, SG, SF/
CC or SG/CC in a 30 weight viscosity grade.
Engine Oil Filter – T
oro part no. 57–8530
Hydraulic Oil – Mobil DTE 26 or other interchange-
able equivalent. See chart below for equivalent oils.
Mobil DTE 26
Shell Tellus 68
Amoco Rykon Oil #68
Conoco Super Hydraulic Oil 68
Exxon Nuto H 68
Kendall Kenoil R&O 68
Pennzoil Penreco 68
Phillips Magnus A 68
Standard Energol HLP 68
Sun Sunvis 831 WR
Union Unax AW 68
Water Pump Case Oil – Mobil DTE Extra Heavy or
other interchangeable ISO Grade 150 PE–700–A
(Heavy Inhibited Hydraulic & General Purpose) See
following
chart for equivalent oils.
Mobil DTE EH (Extra Heavy)
Shell Turbo 150
Amoco American Ind. Oil 150
Chevron AW Machine Oil 150
Conoco Dectol R & O150
Exxon Terresstic 150
Kendall Ken–Tran 080
Pennzoil Penreco 150/AW150
Phillips Magnus Oil 150
Standard Energol HLP 150
Sun Sunvis 150
Union Unax RX 150/T
urbine Oil 150
Valvoline ETC (R&O) #70
Water Supply – Recommend a source with 4–5 gal-
lons per minute. A pressure range of zero to 10 psi
at the machine is required. Maximum allowable inlet
pressure is 25 psi. Although irrigation water pumped
from ponds or ef
fluent holding pools can be used,
not all conditions can be handled by the machines
filtration system, additional or alternative filtration
may be required.
Water Filter Cartridge – Toro part no. 86–8630
DO NOT USE CHEMICALS – Concern for environmental issues and corrosive affects on machine compo-
nents.
Hydroject 4000
Page 8 – 5
Rev
. B
Addendum