Operator's Manual

Service Interval Chart

Check Pump Case Oil Daily

Check Engine Oil Level Daily

Check Hydraulic Oil Level Daily

Check Safety Interlock Switch Operation Daily

Check Water Filter/Pressure Daily

Change Gear Case Hydraulic Oil & Filter(Initial) 25 hours

Change Engine Oil (Initial) 25 hours

Change Pump Case Oil (Initial) 25 hours

Check Tire Pressure 25 hours

Check Hoses, Lines & Housings for Leaks 25 hours

Lubricate Grease Fittings (5 locations) 25 hours

Check Battery 25 hours

Clean Spray Wash Tips & Strainer 100 hours

Change Engine Oil & Filter 100 hours

Clean Air Cleaner (Clean & re-oil Foam Pre Cleaner) 100 hours

Check Accumulator Pre Charge* 100 hours

Check Engine RPM 100 hours

Adjust Parking Brake 250 hours

Change Gear Case Hydraulic Oil & Filter 250 hours/Seasonal

Change Pump Case Case Oil 250 hours/Seasonal

Check/Adjust Water System Cam/Valve 250 hours/Seasonal

Change Fuel Filter 250 hours/Seasonal

Clean Engine Cooling Fins 250 hours/Seasonal

Adjust Traction Spacing 250 hours/Seasonal

Adjust Clutch / Brake* 250 hours/Seasonal

Change Air Filter Element 250 hours/Seasonal

Recharge Accumulator* 250 hours/Seasonal

Clean/Decarbon Combustion Chamber & Intake Port (If using leaded fuel)* 250 hours

Replace Spark Plugs 500 hours

Adjust Engine Valve Lash* 500 hours

Clean Engine Breather* 500 hours

Inspect Nozzles/Springs* 500 hours

Check Water System Performance 500 hours

* Have machine serviced by an Authorized Toro Distributor.