Operator's Manual

RemovingorInstallingthe
StandardBed
Thestandardbedissecuredtothechassiswithbolts
andnuts(Figure33).Removethehardwaretoremove
thebed;useittosecurethebedtothechassis.
CAUTION
Thestandardbedisheavy;donottrytohoist
itbyyourself.
Useliftingequipment(e.g.,anoverheadhoist)
toraiseorlowerthebed.
g246519
Figure33
1.Standardbed
3.Nut
2.Bolt
UsingtheOperation-Mode
Selector
Note:Themachinemustcometoastopbeforeyou
canchangethemodes.
Important:LeavingthemachineinInchModeor
SetupModedisablesthenormalcleaningprocess
ofthediesel-particulatelter(DPF).Leavingthe
machineineithermodecanplugtheDPFand
initiateaparkedregeneration.
Usethemodeselectortochangethemachine
operationstatusortosetupattachments.Themodes
areasfollows:
AttachmentMode
UseAttachmentModetoselectthespecictypeof
attachmentorwhenattachmentsareinstalledand
beingmovedtotheworksite.ToaccessAttachment
Mode,turntheoperation-modeselectortotheA
position(Figure34).
Note:Changingattachmentsmountedtothe
Outcrossmayrequiretheinputofapinnumber.
Note:DrivingthemachineinAttachmentMode
operatesthesameasdrivinginLowAutomotive
ModewhenthePTOswitchisintheOFFANDDISABLED
positionandtheauxilaryhydraulicleverisinthe
NEUTRALposition.
g250707
Figure34
35