Service Manual

Workman HD SeriesPage 6 − 28Drive Train
19.If PTO cover is on transaxle, remove cap screws and
nut with washer. Separate PTO cover from transaxle
case. Inspect PTO cover for cracks or damage and re-
place if necessary.
1
2
3
1. Cap screw (5)
2. Nut
3. PTO cover
Figure 39
20.Remove oil cap and O−ring from transaxle case if
necessary.
21.Remove air breather if necessary.
1
2
1. Oil cap 2. Air breather
Figure 40
22.Loosen flange head screws and remove upper cover
from transaxle case.
1
2
1. Flange head screw (4) 2. Upper cover
Figure 41