Operator's Manual
•Viscosity—ASTMD445cSt@40ºC:44to48/cSt
@100ºC:7.9to8.5
•ViscosityIndex,ASTMD2270—140to152
•PourPoint,ASTMD97—-35ºFto-46ºF
•FZG,Failstage—11orbetter
•Watercontent(newuid)—500ppm(maximum)
IndustrySpecications:
VickersI-286-S,VickersM-2950-S,DenisonHF-0,
Vickers35VQ25(EatonATS373-C)
Note:Manyhydraulicuidsarealmostcolorless,
makingitdifculttospotleaks.Areddyeadditivefor
thehydraulicsystemuidisavailablein20ml(0.67
oz.)bottles.Abottleissufcientfor15to22L(4to6
USgallons)ofhydraulicuid.OrderPartNo.44-2500
fromyourauthorizedTorodistributor.
Note:Iftheuidbecomescontaminated,contact
yourlocalT orodistributorbecausethesystemmust
beushed.Contaminateduidmaylookmilkyor
blackwhencomparedtocleanuid.Theservice
intervalmayneedtobeincreasedifusingmultiple
attachmentsastheuidmaybecomecontaminated
quickerwiththemixingofdifferenthydraulicuids.
1.Cleantheareaaroundthehigh-ow-lter
mountingarea(Figure73).
2.Placeadrainpanunderthelterandremove
thelter.
Note:Iftheuidisnotgoingtobedrained,
disconnectandplugthehydrauliclinegoingto
thelter.
3.Lubricatethenewlter-sealinggasketandhand
turnthelterontothelterheaduntilthegasket
contactsthelterhead.Thentightenit3/4turn
further.Theltershouldnowbesealed.
4.Fillthehydraulicreservoirwithapproximately15
L(4USgallons)ofhydraulicuid.
5.Startthemachineandrunitatidleforabout2
minutestocirculatetheuidandremoveanyair
trappedinthesystem.
6.Stopthemachineandchecktheuidlevel.
7.Verifytheuidlevel.
8.Disposeoftheuidproperly.
RaisingtheCargoBoxin
anEmergency
Thecargoboxcanberaisedinanemergencywithout
startingtheenginebycrankingstarterorbyjumping
hydraulicsystem.
RaisingtheCargoBoxusingthe
Starter
Crankthestarterwhileholdingtheliftleverinthe
Raiseposition.Runthestarterfor10seconds,then
wait60secondsbeforeengagingthestarteragain.
Iftheenginewillnotcrank,youmustremovethe
loadandbox(attachment)toservicetheengineor
transaxle.
RaisingtheCargoBoxbyJumping
theHydraulicSystem
CAUTION
Araisedbedfullofmaterialwithouttheproper
safetysupportrodmaylowerunexpectedly.
Workingunderanunsupportedraisedbed
maycauseinjurytoyouorothers.
•Beforeservicingormakingadjustmentsto
themachine,shutofftheengine,setthe
parkingbrake,andremovethekeyfrom
theignitionswitch.
•Removeanyloadmaterialfromthebed
orotherattachmentandinsertthesafety
supportonafullyextendedcylinderrod
beforeworkingunderaraisedbed.
Youwillneed2hydraulichoses,eachwitha
maleandfemalequickcoupler,thattthevehicle
couplers,toperformthisoperation.
1.Backanothermachineuptotherearofthe
disabledmachine.
Important:Themachinehydraulicsystem
usesDexronIIIATF.Toavoidsystem
contamination,makesurethevehicleused
tojumpthehydraulicsystemusesan
equivalentuid.
2.Onbothmachine,disconnectthe2quick-coupler
hosesfromthehosessecuredtothecoupler
bracket(Figure74).
59