Operator's Manual

Figure55
1.Over-inatedtire
CheckingtheFrontWheel
Alignment
ServiceInterval:Every400hours/Yearly(whichevercomes
rst)
1.Makesurethetiresarefacingstraightahead.
2.Measurethecenter-to-centerdistance(ataxleheight)at
thefrontandrearofthesteeringtires(Figure56).
Note:Themeasurementmustbewithin0±3mm(0
±0.12inch)atthefrontofthetirethenattherearof
thetire.Rotatethetire90°andcheckthemeasurement.
Important:Checkthemeasurementsatconsistent
locationsonthetire.Themachineshouldbeona
atsurfacewiththetiresfacingstraightahead.
Figure56
1.Frontofthemachine3.Centertocenterdistance
2.0±3mm(0±0.12inch)
fronttorearofthetire
3.Adjustthecenter-to-centerdistanceasfollows:
A.Loosenthejamnutatthecenterofthetierod
(Figure57).
Figure57
1.Tierods2.Jamnuts
B.Rotatethetierodtomovethefrontofthetire
inwardoroutwardtoachievethecentertocenter
distancesfromfronttoback.
C.Tightenthetierodjamnutwhentheadjustment
iscorrect.
D.Checktoensurethatthetiresturnanequal
amounttotherightandtotheleft.
Note:Ifthetiresdonotturnequally,refertothe
ServiceManualfortheadjustmentprocedure.
46