Operator's Manual

HydraulicSystem
Maintenance
ChangingtheHydraulicuid
andCleaningtheStrainer
ServiceInterval:Every800hours
Hydraulic-uidcapacity:approximately7L(7.5USqt)
Hydraulic-uidtype:DexronIIIATF
1.Positionthemachineonalevelsurface,stopthe
engine,engagetheparkingbrake,andremovethekey
fromtheignitionswitch.
2.Removethedrainplugfromthesideofthereservoir,
andletthehydraulicuidowintoadrainpan(Figure
72).
Figure72
1.Hydraulicreservoir2.Drainplug
3.Notetheorientationofthehydraulichoseand90°
ttingconnectedtothestraineronthesideofthe
reservoir(Figure73).
4.Removethehydraulichoseand90°tting.
5.Removethestrainerandcleanitbybackushingit
withacleande-greaser.
Note:Allowittoairdrybeforeinstalling.
Figure73
1.Hydraulicstrainer
6.Installthestrainer.
7.Installthehydraulichoseand90°ttingtothestrainer
inthesameorientation.
8.Installandtightenthedrainplug.
9.Fillthereservoirwithapproximately7L(7.5USqt)
ofthespeciedhydraulicuid;referto
Checkingthe
Transaxle/Hydraulic-uidLevel(page21)
.
10.Starttheengineandoperatethemachinetollthe
hydraulicsystem.
11.Checkthehydraulicuidlevelandreplenishit,if
required.
Important:Useonlythehydraulicuidspecied.
Otheruidscouldcausesystemdamage.
ReplacingtheHydraulicFilter
ServiceInterval:Aftertherst10hours
Every800hours
Important:Useofanyotherltermayvoidthewarranty
onsomecomponents.
1.Positionthemachineonalevelsurface,stopthe
engine,engagetheparkingbrake,andremovethekey
fromignitionswitch.
2.Cleantheareaaroundltermountingarea.
3.Placeadrainpanunderthelterandremovethelter
(
Figure74).
52