Operator's Manual

5.Recheckthe3.75±0.12inch(9.5±0.3cm)
dimensionafterthejamnutshavebeentightenedto
ensureproperadjustment.Readjust,ifnecessary.
6.Connectthereturnspringtotheclutchlever.
Important:Ensurethattherodendis
positionedsquarelyontheball,nottwisted,and
remainsparalleltotheclutchpedalafterthejam
nutistightened(
Figure75).
Figure75
1.Clutchcablerodend
3.Rodendjamnut
2.Clutchpedal
4.Parallel
Note:Theclutchfreeplayshouldneverbeless
than0.75inch(19mm).
ConvertingtheSpeedometer
YoucanconvertthespeedometerfromMPHtoKPH
orKPHtoMPH.
1.Positionthevehicleonalevelsurface,stopthe
engine,engagetheparkingbrake,andremovethe
keyfromtheignitionswitch.
2.Removethehood.RefertoRemovingtheHoodin
thePre-maintenanceProcedures.
3.Locatethetwoloosewiresnexttothespeedometer.
4.Removetheconnectorplugfromtheharnesswire
andconnectthewirestogether.
ThespeedometerwillswitchtoKPMorMPH.
5.Installthehood.
HydraulicSystem
Maintenance
ChangingtheHydraulicFluid
andCleaningtheStrainer
ServiceInterval:Every800hours
1.Positionthevehicleonalevelsurface,stopthe
engine,engagetheparkingbrake,andremovethe
keyfromtheignitionswitch.
2.Removethedrainplugfromthesideofthereservoir
andletthehydraulicuidowintoadrainpan
(
Figure76).
Note:Cleanthehydraulicstrainer.Referto
CleaningHydraulicStrainer.
Figure76
1.Hydraulicreservoir2.Drainplug
3.Notetheorientationofthehydraulichoseand90
degreettingconnectedtothestrainerontheside
ofthereservoir(Figure77).Removethehydraulic
hoseand90degreetting.
4.Removethestrainerandcleanitbybackushingit
withacleande-greaser.Allowittoairdrybefore
installing.
53