Service Manual

Workman HDX--D
Page 4 -- 3
Briggs/Daihatsu Diesel Engine
General Information
This Chapter gives informationabout specificationsand
repair of the Briggs and Stratton/Daihatsu 3LC diesel
engine used in the Workman HDX--D.
Generalengine maintenance procedures are described
in your Operator’s Manual. Information on engine trou-
bleshooting,testing,disassemblyand assembly isiden-
tified in the Briggs & Stratton/Daihatsu Repair Manual
that is included at the end of this section.
Most repairs and adjustments require tools which are
commonly available in many service shops. Special
tools are described in the Briggs & Stratton/Daihatsu
Repair Manual. The use of some specialized test equip-
ment is explained. However, the cost of the test equip-
ment and the specialized nature of some repairs may
dictate that the work be done at an engine repair facility.
Service and repair parts for Briggs and Stratton/Daihat-
su 3LC diesel engines are supplied through your local
Toro distributor.
Operator’s Manual
The Operator’s Manual provides information regarding
the operation, general maintenance and maintenance
intervals for your WorkmanHDX--D vehicle. Refer tothe
Operator’s Manual for additional information when ser-
vicing the vehicle.
Adding Oil to Engine
When adding oil to the engine, maintain clearance be-
tweenthe oil fill device andthe oil fill openingin the valve
cover(Fig.1).This clearance is necessarytoallow vent-
ing when adding engine oil which will prevent oil from
running into the breather tube and intake system.
Figure 1
CLEARANCE
CLEARANCE
Briggs/Daihatsu
Diesel Engine