Service Manual

Workman 2100/2110 Page 3 – 11 Briggs & Stratton Gasoline Engine

Clean Debris from Engine

Note: Perform this maintenance procedure at the in-

terval specified in the Operator’s Manual or Chapter 2

– Product Records and Maintenance.

IMPORTANT: This engine is air–cooled. Operating

the engine with dirty or plugged cooling fins, a

blocked rotating screen, or plugged or dirty blower

housing will result in overheating and engine dam-

age.

1. Park machine on a level surface, stop engine, en-

gage parking brake, and remove key from the ignition

switch.

2. Raise bed and support with prop rod (see Operator’s

Manual).

IMPORTANT: Never clean engine with pressurized

water. Water could enter and contaminate the fuel

system.

3. Clean cooling fins on both cylinder heads (Fig. 13).

4. Clean rotating screen and blower housing of dirt and

debris. Remove screen and housing if necessary

(Fig.14).

IMPORTANT: Never operate engine without the

blower housing installed. Overheating and engine

damage will result.

5. Make sure rotating screen and blower housing are

reinstalled to the engine if removed.

Figure 13

1. Cylinder head cooling fins

Figure 14

1. Rotating screen 2. Blower housing

Briggs & Stratton

Gasoline Engine