Operator's Manual

13
Setup
Note: Determine the left and right sides of the machine from the normal operating position.
Loose Parts
Note: Use the chart below to verify that all parts have been shipped.
Description
Qty. Use
Wheel assembly 2 Installing the rear wheels (Model No. 07277TC)
Wheel assembly
Washer
Dust cap
2
2
2
Installing the front wheels (Model No. 07277TC)
Steering wheel 1 Installing the steering wheel (Model No. 07277TC)
Bumper 1 Installing the bumper (Model No. 07277TC)
Hitch 1 Installing the hitch (Model No. 07277TC)
Seat 2 Installing the seats (Model No. 07277TC)
Cargo box
Right-hand pivot bracket
Left-hand pivot bracket
Flange head screw, 3/8 x 1 in.
Bolt, 5/16 x 3/4 in.
1
1
1
4
1
Installing the cargo box (Model No. 07277TC)
Key 2 Use in the ignition switch.
Operator’s Manual
Engine Operator’s Manual
1
1
Read before operating the machine.
Operator Video 1 Watch before operating the machine.
Parts Catalog 1 Use for ordering replacement parts.
Registration Card 1 Complete and return to Toro.
Predelivery Inspection Form 1 Complete and file in your customer history portfolio.
Installing the Rear Wheels
Note: This procedure is only needed for Model No.
07277TC.
1. Remove the fasteners securing the wheels.
2. Remove the shipping bracket secured to the wheel
studs.
3. Mount the wheels with the previously removed
fasteners (Fig. 2) and torque to 45–65 ft.-lb.
(61–88 N⋅m).
1
2
3
Figure 2
1. Wheel assembly
2. Wheel nut
3. Wheel stud