Operator's Manual

g033054
Figure28
1.Cotterpin
3.Dustcap
2.Nutretainer
9.Installthecotterpinandbendeachlegsaround
theretainer(Figure28).
10.Installthedustcapontothehub(Figure28).
11.Repeatsteps1through10forthehubandrotor
attheothersideofthemachine.
InstallingtheBrakesandWheels
1.Cleanthe2ange-headbolts(3/8x3/4inch)and
applyacoatofmedium-strengththread-locking
compoundtothethreadsofthebolts.
2.Alignthebrakepadstoeithersideoftherotor
(Figure23)andtheholesinthecaliperbracket
withtheholesinthebrakemountofthespindle
frame(Figure27).
3.Securethecaliperbrackettothespindleframe
(Figure23)usingthe2ange-headbolts(3/8
x3/4inch).
Torquethe2ange-headboltsto47to54N∙m
(35to40ft-lb).
4.Aligntheholesinthewheeltothestudsofthe
hubandassemblethewheeltothehubwiththe
valvestemoutward(Figure22).
Note:Ensurethatthemountingsurfaceofthe
wheelisushwiththehub.
5.Securethewheeltothehubusingthelugnuts
(Figure22).
Torquethelugnutsto108to122N∙m(80to90
ft-lb).
6.Repeatsteps1through5forthebrakeand
wheelontheothersideofthemachine.
EngineMaintenance
EngineSafety
•Shutofftheengine,removethekey,andwaitfor
allmovingpartstostopbeforecheckingtheoilor
addingoiltothecrankcase.
•Keepyourhands,feet,face,clothing,andother
bodypartsawayfromthemuferandotherhot
surfaces.
ServicingtheAirFilter
ServiceInterval:Every100hoursReplacethe
air-lterelementsoonerifitdirtyor
damaged.
Note:Servicetheairltermorefrequently(everyfew
hours)ifoperatingconditionsareextremelydustyor
sandy.
CheckingtheAirFilter
1.Raisethecargobedandsecureitwiththeprop
rod.
2.Checktheair-cleanerbodyfordamagewhich
couldpossiblycauseanairleak(Figure29and
Figure30).
Note:Ensurethecoversealsaroundthe
air-lterbody.
Note:Replaceadamagedair-ltercoveror
housing.
g037010
Figure29
33