Service Manual

27. Install fork shaft case:
A. Apply silicone sealant to mating surface of fork
shaft case.
B. Insert spindle (Item 1) between fork shafts.
1
Figure 117
C. Insert 2 steel balls (Item 2) and 2 springs (Item 1)
into the grooves.
2
1
Figure 118
D. Install fork shaft case (Item 2). Tighten caps-
crews (Item 1) to a torque of 24.5 –
29.5 Nm (18.5
– 22 ft–lb). Check operation of shifters and detent.
1
2
Figure 119
28. Insert a washer (Item 1) into housing of transaxle
case. Apply moly disulfide grease to washer before
installing.
1
Figure 120
Drive Train Page 6
– 50 Workmand 3000 /4000 Series