Service Manual

10. Install PTO cover:
A. Insert new oil seal into PTO cover. Apply multi–
purpose grease to lip of oil seal.
B. Insert 2 dowel pins onto PTO case.
C. Apply silicone sealant onto mating surface of
PT
O cover.
D. Install PTO cover. Tighten capscrews and nut
with lockwasher to a torque of 24.5 – 29.5 Nm (18.5
– 22 Nm).
Figure 162
Drive Train
Page 6
– 64
Workman 3000/4000 Series